Five Ways to Kick Start an Energy Saving Habit

There is a time every month when smiles are all around as the pay check arrives, only to be wiped away by the dreadful utility bills that start to line the letterbox. The pay check does not have to be sidelined by an extravagant amount on the electricity bill, and with a bit of extra care and attention the hefty price tags can actually be slashed down by a good bit.

With that thought in mind, there are a handful of factors that can help alleviate the cost of bills, which also lean towards a more environmentally friendly approach. Here are some of the major changes that can be done when it comes to energy usage at home, and even at work: -

Consider Energy-Saving Bulbs & Lighting

They may cost a bit more than regular light bulbs, but in the long term, energy-saving bulbs help by doing just as their name suggests, and this is by using as little electricity as possible. When choosing an light bulb, go for one which is bigger compared to a bunch of little ones, as one big bulb would possibly run on twenty percent less in energy usage compared to two or three small bulbs.

Disconnect Unused Plugs from the Power Points

This may not be known to a lot of people, but although the electrical point has been switched off, electricity still runs through the plug points and to the appliances, which accounts for a reasonable amount of unused yet billed electricity usage. As these household and commercial appliances still have a few watts of electricity running through them, the voltages would ultimately contribute towards an unnecessary surplus in the electricity bills. Remove these charges by unplugging any electrical item which is not being used, such as handphone chargers, laptop cables and microwaves.

A Reasonable Thermostat Setting

Air conditioners consume a lot of energy, and it has been documented that for every reduction in a degree to cool a room, the electricity consumption would in fact increase by an average of five percent. The ideal way to get the best out of an air conditioner would be to first cool the room with the lowest temperature possible, and later adjusting the thermostat to a more moderate setting.

Invest in Appliances with Inverter Features

Appliances such as refrigerators, air conditioners and even microwaves are now available with inverters. The concept of an inverter in electrical appliances is pretty simple; it reduces the usage of electricity as it can run on a partial electricity load compared to appliances that work without an inverter. Though the initial cost of these electrical goods may be a bit on the higher end, it is a good investment in the long run, and helps curb unnecessary electrical consumption.

Why Overloading Is Bad

Electrical goods like dishwashers and washing machines are made to work at optimum levels with a specified amount of dishware or clothing, so be sure to read the labels and manuals properly before putting them into use. Overloading will only cause harm to the appliances in the long term, and also result in additional electricity usage as the machines struggle to cope with the extra workload.

Energy conservation can be practiced anywhere, and at any point of time. All it needs is a bit of groundwork and extra effort, and with the right practices, the numbers that are shown on the electricity bill can be reduced by a fairly liberal amount. There is also the extra advantage of doing what is right for the environment, and taking baby steps towards going green!

Related

Other Ways to Start a Energy Saving Habit

New! Comments

Have your say about what you just read! Leave me a comment in the box below.

Enter Your E-mail Address
Enter Your First Name (optional)
Then

Don't worry — your e-mail address is totally secure.
I promise to use it only to send you The Green E-Zine.